Quotes typically within 24 hours
    Machined round component blanks in a blue workshop tray; reference component imagery
    Nitrogen-strengthened stainless

    Nitronic 50 (UNS S20910)

    Chemistry, properties & fasteners

    A nitrogen-strengthened austenitic stainless steel — supplied as shafts, stems, pins and threaded parts to drawing in annealed or high-strength conditions.

    Request a Quote
    UNS S20910

    Grade · condition · drawing · traceability

    ENGINEERED SUPPLY, NOT OFF-THE-SHELFQUALIFIED PARTNER NETWORKLEAD TIME CONFIRMED PER RFQ

    EMG / MATERIAL DOSSIER

    The specification behind the part.

    UNS
    S20910
    Tensile, A479 annealed
    100 ksi min
    Yield, A479 annealed
    55 ksi min
    Elongation
    35% min
    Strengthening
    Nitrogen / cold work
    Magnetic
    No (annealed)

    Alloy identity. Product requirements.

    Nitronic 50 (UNS S20910) uses manganese and nitrogen to roughly double the yield strength of 316 in the annealed condition, while adding molybdenum, niobium and vanadium.

    ASTM A276 and A479 list S20910 bar in annealed and high-strength conditions. Specify the condition and section size, as strength varies with both.

    STRENGTH / CONDITION / PRODUCT FORM

    Mechanical properties

    Bar — ASTM A479 S20910

    Bar — ASTM A479 S20910
    ConditionTensile min (ksi)Yield 0.2% min (ksi)Elongation min (%)
    Annealed1005535

    Values per ASTM A479, for orientation. The edition named on your purchase order governs acceptance.

    HEAT CHEMISTRY / COMPOSITION LIMITS

    Chemical composition

    Nominal composition (range midpoints, orientation only)

    • Fe ≈ 58.5%
    • Cr ≈ 22%
    • Ni ≈ 12.5%
    • Mn ≈ 5%
    • Mo ≈ 2.25%
    • Other ≈ 0.75%
    Nitronic 50 chemical composition limits
    ElementSymbolMin %Max %
    ChromiumCr20.523.5
    NickelNi11.513.5
    ManganeseMn4.06.0
    MolybdenumMo1.53.0
    NitrogenN0.200.40
    NiobiumNb0.100.30
    VanadiumV0.100.30
    SiliconSi—1.00
    CarbonC—0.06
    PhosphorusP—0.045
    SulfurS—0.030
    IronFeBalance—

    Values per ASTM A479, for orientation. The edition named on your purchase order governs acceptance.

    PURCHASE ORDER / ACCEPTANCE RECORDS

    Standards & documentation

    ASTM A276

    Stainless bar and shapes, including S20910.

    ASTM A479

    Stainless bar for boilers and pressure vessels, including S20910.

    NACE MR0175 / ISO 15156

    Sour-service acceptance depends on condition and environment.

    EN 10204 3.1 / 3.2

    Inspection document type, PMI and witness scope stated on the RFQ.

    SPECIALISED INDUSTRIAL PROCUREMENT

    Nitronic 50 fasteners. A complete requirement.

    EMG reviews Nitronic 50 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.

    MATERIAL / APPLICATION / CONDITION

    Nitronic 50: specify the strength condition

    Nitronic 50 is a nitrogen-strengthened austenitic stainless steel identified as UNS S20910. Supplied strength can vary with condition, so annealed and high-strength material should not be treated as one acceptance class.

    EMG reviews Nitronic 50 requirements through qualified supply partners. Include the drawing revision, quantity, material condition and required site date so sourcing and documentation can be defined before an order is placed.

    Explore the materials reference
    Precision-machined shafts, housings and threaded components illustrating component applications
    EMG component imagery. Photographs illustrate component types; the material certificate verifies the supplied grade.
    PROCUREMENT REFERENCE

    What to specify

    Nitronic 50

    UNS S20910

    Shafts · valve parts · specified fasteners

    RFQ CHECK

    State the product standard, annealed or high-strength condition, section size and required properties before quoting a finished component.

    Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

    WHERE THE SPECIFICATION MATTERS

    Engineered around the application

    Water treatment plant and industrial water-handling equipment

    Pump shafts and valve assemblies

    Drawing-led shafts, pins, stems and threaded components whose designer specifies S20910.

    Socket head cap screws illustrating threaded-component applications

    Fastener assemblies

    Studs, hex bolts and companion nuts in Nitronic 50 to the approved drawing. Confirm thread form, length, mating material and any coating requirements.

    Duplex machined valve body illustrating valve-component geometry, not the featured alloy

    Parts to drawing

    Shafts, sleeves, collars and valve parts supplied through qualified manufacturing partners. Fits, surface finish, treatment and usable capacity are confirmed per enquiry.

    ENGINEERING CHECKPOINTS

    Control the details that matter.

    01

    The product specification governs

    State the product standard, annealed or high-strength condition, section size and required properties before quoting a finished component.

    02

    No automatic substitutions

    Nitronic 50 is not Nitronic 60 (S21800). Corrosion and strength priorities differ from the anti-galling focus of Nitronic 60.

    03

    Verify the finished part

    State the required chemical, mechanical, hardness and dimensional records. Request EN 10204 3.1 / 3.2, PMI or witness inspection where the project requires them; the quotation must identify the agreed scope.

    MATERIAL QUESTIONS

    Ordering Nitronic 50

    What is Nitronic 50?

    Nitronic 50 is a nitrogen-strengthened austenitic stainless steel identified as UNS S20910. Supplied strength can vary with condition, so annealed and high-strength material should not be treated as one acceptance class.

    What should a Nitronic 50 RFQ include?

    State the product standard, annealed or high-strength condition, section size and required properties before quoting a finished component. Include dimensions or drawing revision, quantity, inspection scope and the required site date.

    Can EMG supply Nitronic 50 bolts and machined parts?

    EMG accepts specification-led enquiries for industrial fasteners and components. Product form, sourcing, partner capacity, certification and lead time are confirmed at quotation; this page does not establish stock or guaranteed service suitability.

    Can I substitute a related alloy?

    Nitronic 50 is not Nitronic 60 (S21800). Corrosion and strength priorities differ from the anti-galling focus of Nitronic 60.

    Are annealed and high-strength Nitronic 50 interchangeable?

    No. Identify the S20910 product form, condition, section size and required properties. A generic Nitronic 50 designation does not define one universal mechanical acceptance class.

    YOUR SPECIFICATION. OUR SUPPLY NETWORK.

    Send the requirement.
    Get a defined supply route.

    For Nitronic 50 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.

    Drawing & dimensions

    Revision, thread form, fits and surface finish.

    Material & condition

    UNS, product standard, heat treatment and service requirements.

    Inspection & records

    Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.

    Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.

    Quotes typically within 24 hours.

    Connected capabilities

    TECHNICAL REFERENCES

    Nitronic 50 — producer material reference

    Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.

    GET IN TOUCH

    Ready to Source Your Next Project?

    Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects