RapidBoltOne supplier for bolting + machined parts
Fewer purchase orders and one point of accountability for the joint — the studs, nuts and the machined parts around them.
SUPPLIED TO YOUR DRAWING • FULLY TRACEABLE
Precision Machined Components
From one-off breakdown replacements to production runs – machined to your drawing, sample or 3D model, with full material traceability.
BOLTING AND THE PARTS AROUND THE JOINT
One accountable supplier for the whole joint
EMG supplies critical bolting to the LNG, oil & gas, petrochemical, mining, power and heavy-industry sectors. We now also supply precision machined components through our qualified machining partner network.
That means you get the bolting and the machined parts around the joint from one supplier — with the same documentation and traceability you already get from us.
WHY EMG
Why EMG for machined components
Built for urgent work
Breakdowns, shutdowns and obsolete parts, quoted and expedited for fast turnaround.
Material control
We source the material, including exotic and corrosion-resistant grades, and manage the certification.
Documentation as standard
MTCs, certificates of conformance and dimensional inspection reports. Third-party inspection on request. Bureau Veritas ISO 9001:2015 certified.
MACHINING CAPABILITIES
Machining capabilities
Supplied through our machining partners, with the route selected to suit the part, material and inspection requirements.
CNC Turning
Small to large-diameter components, long shafts and heavy parts.
CNC Milling
3-axis, 4-axis and multi-axis machining of plates, blocks, housings and fabrications.
Mill-Turn / Multi-Axis
Complex parts completed in fewer setups for accuracy between features.
Large Component Machining
Heavy parts requiring turning, boring, milling and drilling.
Horizontal Boring
Housings, bearing bores, gearbox components and frames.
Vertical Turning & Boring
Large rings, flanges, pulleys, wheels and housings.
Threading, Drilling & Tapping
Precision hole patterns, large threads, keyways, splines and slots.
Repair & Reclamation
Re-machining, boring, facing, sleeving and modification of existing parts.
Precision Inspection
Dimensional and CMM inspection where required.
PARTNER-MANAGED MACHINING · RFQ-CONFIRMED CAPACITY
Sizing & machine capability
EMG manages component supply through qualified machining partners. The machine classes below describe potential manufacturing and inspection routes — they are partner equipment, not EMG-owned machinery.
Indicative reference ranges, not committed capacity
These ranges summarise a supplied third-party capability statement for initial RFQ discussion. They do not establish availability within EMG’s partner network. Axis maxima may come from different machines and cannot be combined into one working envelope. Machine travel is not finished-part size, turning diameter, load capacity or a tolerance guarantee.
PARTNER MACHINE CLASS / APPLICATIONINDICATIVE REFERENCE RANGE
Multi-axis turn-mill centres
Valve stems, valve trim, complex bodies and components with turned and milled features.
X: 400–1,525 mm · Y: 230–1,060 mm · Z: 695–1,585 mm
Published axis travels across reference machines; Y axis where specified.
Horizontal & vertical CNC machining centres
Manifold blocks, plates, bearing housings and finish-machined fabrications.
X: 1,000–2,500 mm · Y: 670–1,650 mm · Z: 625–1,200 mm
Published axis travels across selected reference machines.
Long-bed CNC turning / live-tool lathes
Pump shafts, sleeves, bushes and long cylindrical components.
X: 550–1,000 mm · Z: 1,105–4,000 mm
Published X/Z values; not verified turning diameters or finished shaft lengths.
Vertical turning lathes
Large rings, flanges and housings requiring turning and facing.
X: 1,900 mm · Z: 900 mm
Single reference machine's published X/Z values; not a guaranteed part envelope.
Bridge coordinate measuring machines (CMM)
Dimensional verification of components against the agreed drawing and inspection plan.
Measuring stroke: 1,400 × 2,250 × 1,000 mm
Reference measuring stroke; access, probing and fixtures reduce the usable envelope.
Your drawing determines the confirmed capacity
For each RFQ, EMG confirms the selected partner, machine route, usable component envelope, material suitability, workholding, weight, access, tolerances, inspection scope and lead time before quotation. Nickel alloys such as Inconel 625 and 718 require material-specific tooling and process review; size alone does not establish machinability or turnaround.
AUSTRALIA-WIDE MINING & FIXED-PLANT SUPPLY
Large-diameter parts, pump and valve components
Collars, sleeves, spacer rings and equipment components supplied to your controlled drawing through qualified machining partners. For mining maintenance and shutdown work, EMG confirms the usable diameter, bore, length, weight, material, workholding and inspection scope before committing to a price or delivery date.
Collars, sleeves & rings
Large-diameter collars, shaft sleeves, bushes, spacer rings and bearing housings. Supply the OD, ID, length, fits, split features, finish and any heat-treatment requirements.
Pump components
Pump shafts, shaft sleeves, wear rings and drawing-defined housings for slurry, dewatering and process equipment. Include concentricity, runout, seal interfaces and wear or corrosion conditions.
Valve components
Valve stems, trim, seats and manifold blocks to approved drawings. Identify pressure-boundary requirements, sealing faces, material specification and required inspection or witness points.
Enquiries welcome from Mackay, Moranbah and the Bowen Basin, Mount Isa, the Pilbara and Goldfields, Hunter Valley and mining operations throughout South Australia, Victoria, Tasmania and the Northern Territory. Delivery route and timing are confirmed per order; these are service areas, not local EMG workshops. Replacement parts require your engineering approval — an equipment reference alone does not establish OEM equivalence.
COMPONENTS WE SUPPLY
Components we supply by industry
Oil, Gas & LNG
- Spectacle blinds, spades & spacers
- Orifice, special & reducing flanges
- Spacer & isolating rings
- Pump, valve and compressor shafts, sleeves and bushes
- Special heavy hex nuts
- Spherical and through-hardened washers
- Tensioner spacers
- Reduced-shank and machined-end studs
MATERIALS
Materials we machine
We source and certify the material for your component, from everyday carbon steels to exotic and corrosion-resistant grades.
Carbon & alloy steels
104541404340A105A350 LF2
Stainless steels
304 / 316 / 316L41017-4PH
Duplex & Super Duplex
UNS S31803S32205S32750
Nickel alloys
Inconel 625Inconel 718
Wear-resistant steels
Bisalloy and equivalents
Non-ferrous & plastics
Cast ironBronzeBrassAluminiumEngineering plastics
Other specialised materials on request.
HOW IT WORKS
From drawing to delivery in four steps
- 01
Send your drawing, 3D model or sample/photos
Whatever you have — a controlled drawing, a STEP file or photos of a broken part.
- 02
We review and quote
We confirm material and specification, then quote with a lead time.
- 03
Machined, inspected and documented
Produced through our machining partners to your drawing, then inspected.
- 04
Delivered with full documentation
Shipped with MTC/COC and inspection reports.
Quality and documentation
Bureau Veritas ISO 9001:2015 certified
Material test certificates with heat-number traceability
Dimensional / CMM inspection reports
Third-party inspection and client ITPs accommodated
REQUEST A QUOTE
Send us your drawing
Attach a drawing, 3D model or photos of the part. We'll confirm the material and specification and come back with a price and lead time.