Inconel 725 / Alloy 725
N07725
Age-hardenable nickel alloy considered for high-strength, corrosion-exposed oil and gas components.
Specify solution and ageing treatment, product specification, hardness and required mechanical tests.

Chemistry, properties & fasteners
An age-hardenable nickel-chromium-molybdenum-niobium alloy pairing 625-type corrosion chemistry with high strength — supplied as studs, hangers and parts to drawing for oil-and-gas equipment.
Request a QuoteGrade · condition · drawing · traceability
EMG / MATERIAL DOSSIER
Inconel 725 (UNS N07725) adds titanium and aluminium to a 625-type composition so ageing develops strength well above annealed 625 while retaining a high molybdenum content.
ASTM B805 covers 725 bar and wire; API 6ACRA is often referenced for oil-and-gas parts. Specify the condition, hardness range and any project acceptance testing on the order.
STRENGTH / CONDITION / PRODUCT FORM
| Condition | Tensile min (ksi) | Yield 0.2% min (ksi) | Elongation min (%) |
|---|---|---|---|
| Solution annealed + aged | 150 | 120 | 20 |
Values per ASTM B805, for orientation. The edition named on your purchase order governs acceptance.
HEAT CHEMISTRY / COMPOSITION LIMITS
Nominal composition (range midpoints, orientation only)
| Element | Symbol | Min % | Max % |
|---|---|---|---|
| Nickel | Ni | 55.0 | 59.0 |
| Chromium | Cr | 19.0 | 22.5 |
| Molybdenum | Mo | 7.0 | 9.5 |
| Niobium | Nb | 2.75 | 4.0 |
| Titanium | Ti | 1.0 | 1.7 |
| Aluminium | Al | — | 0.35 |
| Iron | Fe | Balance | — |
| Manganese | Mn | — | 0.35 |
| Silicon | Si | — | 0.20 |
| Carbon | C | — | 0.03 |
| Phosphorus | P | — | 0.015 |
| Sulfur | S | — | 0.010 |
Values per ASTM B805, for orientation. The edition named on your purchase order governs acceptance.
PURCHASE ORDER / ACCEPTANCE RECORDS
Precipitation-hardening Ni-Cr-Mo-Nb bar and wire, including N07725.
Age-hardened nickel alloys for oil-and-gas equipment.
Sour-service acceptance is assessed against the finished condition and environment.
Inspection document type, PMI and witness scope stated on the RFQ.
SPECIALISED INDUSTRIAL PROCUREMENT
EMG reviews Inconel 725 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.
Inconel 725 (UNS N07725) is a nickel-chromium-molybdenum-niobium alloy that can be age hardened for high strength. It combines a corrosion-resistant alloy system with precipitation-hardening capability for demanding engineered components.
A shared alloy family does not make 725 interchangeable with Inconel 625 or 718. EMG reviews Alloy 725 studs, bolts, nuts and machined-component enquiries against the project drawing, specified condition and inspection requirements through qualified supply partners.
Explore the materials reference
N07725
Age-hardenable nickel alloy considered for high-strength, corrosion-exposed oil and gas components.
Specify solution and ageing treatment, product specification, hardness and required mechanical tests.
Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

Specified bolting, connectors and loaded components requiring both strength and corrosion resistance.

Stems, shafts and other drawing-defined parts with controlled heat treatment and inspection.

Studs, bolts and nuts supplied against an approved material and manufacturing specification.
Strength depends on the supplied condition. Define the heat treatment and acceptance properties rather than relying on a typical producer value.
NACE MR0175 / ISO 15156 acceptance depends on the applicable material requirements and service limits. Alloy identity alone is not a compliance certificate.
Changing from 625 or 718 to 725 needs engineering approval, including corrosion, strength, dimensions and bolting compatibility checks.
Inconel 725 is UNS N07725. It is an age-hardenable nickel-chromium-molybdenum-niobium alloy; the product form and heat-treatment condition must also be specified.
No. Alloy 625 is primarily solid-solution strengthened; 725 and 718 can be precipitation hardened but differ in composition and requirements. Substitution requires engineering approval.
No. Compliance must be checked against the applicable ISO 15156 requirements, supplied condition, hardness and service environment, with the required records included in the enquiry.
Not on its own. The approved product specification, solution/ageing treatment, hardness, mechanical tests and service requirements define acceptance of the finished component.
For Inconel 725 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.
Revision, thread form, fits and surface finish.
UNS, product standard, heat treatment and service requirements.
Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.
Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.
Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.
Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.
24/7 availability for critical projects