Quotes typically within 24 hours
    ASTM B637 UNS N07718 bolts in blue protective mesh sleeves with EMG product label
    Age-hardenable nickel alloy

    Inconel 718 (UNS N07718)

    Chemistry, properties & fasteners

    An age-hardenable nickel-chromium-iron alloy with niobium and molybdenum — supplied as high-strength studs, nuts and loaded parts to drawing for power, valve and oil-and-gas equipment.

    Request a Quote
    UNS N07718

    Grade · condition · drawing · traceability

    ENGINEERED SUPPLY, NOT OFF-THE-SHELFQUALIFIED PARTNER NETWORKLEAD TIME CONFIRMED PER RFQ

    EMG / MATERIAL DOSSIER

    The specification behind the part.

    UNS
    N07718
    Tensile, B637 aged
    185 ksi min
    Yield, B637 aged
    150 ksi min
    Hardness, B637 aged
    331 HB min
    Strengthening
    Precipitation
    Magnetic
    No

    Alloy identity. Product requirements.

    Inconel 718 (UNS N07718) is strengthened by controlled precipitation of niobium-rich phases during ageing. The solution and ageing route sets the finished strength and hardness, so the treatment is as important as the alloy name.

    ASTM B637 covers precipitation-hardening nickel alloy bar and forgings for high-temperature service, including N07718. Oil-and-gas projects frequently reference API 6ACRA, which applies tighter processing and acceptance controls.

    STRENGTH / CONDITION / PRODUCT FORM

    Mechanical properties

    Bar & forgings — ASTM B637 N07718

    Bar & forgings — ASTM B637 N07718
    ConditionTensile min (ksi)Yield 0.2% min (ksi)Elongation min (%)Hardness min
    Solution treated + aged18515012331 HB

    Values per ASTM B637, for orientation. The edition named on your purchase order governs acceptance.

    HEAT CHEMISTRY / COMPOSITION LIMITS

    Chemical composition

    Nominal composition (range midpoints, orientation only)

    • Ni ≈ 52.5%
    • Fe ≈ 18.5%
    • Cr ≈ 19%
    • Nb ≈ 5.1%
    • Mo ≈ 3.05%
    • Other ≈ 1.85%
    Inconel 718 chemical composition limits
    ElementSymbolMin %Max %
    NickelNi50.055.0
    ChromiumCr17.021.0
    IronFeBalance—
    Niobium + TantalumNb+Ta4.755.50
    MolybdenumMo2.803.30
    TitaniumTi0.651.15
    AluminiumAl0.200.80
    CobaltCo—1.00
    ManganeseMn—0.35
    SiliconSi—0.35
    CopperCu—0.30
    CarbonC—0.08
    BoronB—0.006

    Values per ASTM B637, for orientation. The edition named on your purchase order governs acceptance.

    PURCHASE ORDER / ACCEPTANCE RECORDS

    Standards & documentation

    ASTM B637

    Precipitation-hardening nickel alloy bar and forgings, including N07718.

    API 6ACRA

    Age-hardened nickel alloys for oil-and-gas equipment, with tighter processing and acceptance controls.

    AMS 5662 / 5663

    Aerospace bar specifications for solution-treated and aged conditions where a drawing names them.

    NACE MR0175 / ISO 15156

    Sour-service hardness and condition limits apply to the finished part, not the alloy name.

    EN 10204 3.1 / 3.2

    Inspection document type, PMI and witness scope stated on the RFQ.

    SPECIALISED INDUSTRIAL PROCUREMENT

    Inconel 718 fasteners. A complete requirement.

    EMG reviews Inconel 718 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.

    MATERIAL / APPLICATION / CONDITION

    718: control the final treatment

    Alloy 718 is a nickel-chromium alloy strengthened through controlled precipitation-hardening treatment. For power and oil-and-gas fasteners, the specified processing route is as important as the alloy designation.

    EMG reviews Inconel 718 requirements through qualified supply partners. Include the drawing revision, quantity, material condition and required site date so sourcing and documentation can be defined before an order is placed.

    Explore the materials reference
    Inconel 718 heavy hex nuts marked EMG 718 packed in a lined carton
    EMG component imagery. Photographs illustrate component types; the material certificate verifies the supplied grade.
    PROCUREMENT REFERENCE

    What to specify

    Inconel 718

    UNS N07718

    Critical studs · turbine hardware · valve parts

    RFQ CHECK

    State the applicable ASTM B637 or project specification, final treatment, mechanical properties and inspection requirements. Do not assume that all 718 conditions satisfy the same service requirements.

    Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

    WHERE THE SPECIFICATION MATTERS

    Engineered around the application

    Offshore oil and gas platform

    Power generation and pressure equipment

    Drawing-controlled studs, nuts and loaded components for turbine, valve and power-station maintenance specifications.

    Two fully threaded Inconel 718 stud bolts supplied by EMG

    Fastener assemblies

    Studs, hex bolts and companion nuts in Inconel 718 to the approved drawing. Confirm thread form, length, mating material and any coating requirements.

    Inconel 718 washers marked EMG 718 packed for dispatch

    Parts to drawing

    Shafts, sleeves, collars and valve parts supplied through qualified manufacturing partners. Fits, surface finish, treatment and usable capacity are confirmed per enquiry.

    ENGINEERING CHECKPOINTS

    Control the details that matter.

    01

    The product specification governs

    State the applicable ASTM B637 or project specification, final treatment, mechanical properties and inspection requirements. Do not assume that all 718 conditions satisfy the same service requirements.

    02

    No automatic substitutions

    The Inconel 718 name alone does not establish sour-service suitability or a permitted hardness. Verify the actual product condition and service specification.

    03

    Verify the finished part

    State the required chemical, mechanical, hardness and dimensional records. Request EN 10204 3.1 / 3.2, PMI or witness inspection where the project requires them; the quotation must identify the agreed scope.

    MATERIAL QUESTIONS

    Ordering Inconel 718

    What is Inconel 718?

    Alloy 718 is a nickel-chromium alloy strengthened through controlled precipitation-hardening treatment. For power and oil-and-gas fasteners, the specified processing route is as important as the alloy designation.

    What should a Inconel 718 RFQ include?

    State the applicable ASTM B637 or project specification, final treatment, mechanical properties and inspection requirements. Do not assume that all 718 conditions satisfy the same service requirements. Include dimensions or drawing revision, quantity, inspection scope and the required site date.

    Can EMG supply Inconel 718 bolts and machined parts?

    EMG accepts specification-led enquiries for industrial fasteners and components. Product form, sourcing, partner capacity, certification and lead time are confirmed at quotation; this page does not establish stock or guaranteed service suitability.

    Can I substitute a related alloy?

    The Inconel 718 name alone does not establish sour-service suitability or a permitted hardness. Verify the actual product condition and service specification.

    What must accompany an ASTM B637 Alloy 718 enquiry?

    Include the final treatment, drawing, size-specific mechanical and hardness requirements and agreed inspection scope. An Alloy 718 designation without its condition does not establish finished-fastener acceptance.

    YOUR SPECIFICATION. OUR SUPPLY NETWORK.

    Send the requirement.
    Get a defined supply route.

    For Inconel 718 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.

    Drawing & dimensions

    Revision, thread form, fits and surface finish.

    Material & condition

    UNS, product standard, heat treatment and service requirements.

    Inspection & records

    Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.

    Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.

    Quotes typically within 24 hours.

    Connected capabilities

    TECHNICAL REFERENCES

    Inconel 718 — producer material reference

    Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.

    GET IN TOUCH

    Ready to Source Your Next Project?

    Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects