Inconel 625
UNS N06625
Corrosion-resistant bolting · process equipment
Specify the product form and annealing condition. ASTM B446 bar requirements do not, by themselves, define a finished fastener standard.

Chemistry, properties & fasteners
A nickel-chromium-molybdenum-niobium alloy strengthened by solid solution — supplied as studs, hex bolts, nuts and parts to drawing for seawater and corrosion-exposed process equipment.
Request a QuoteGrade · condition · drawing · traceability
EMG / MATERIAL DOSSIER
Inconel 625 (UNS N06625) combines about 21.5% chromium, 9% molybdenum and 3.6% niobium in a nickel base. Strength comes from the solid-solution matrix rather than an ageing treatment, which separates it from 718 and 725.
ASTM B446 covers 625 rod and bar in Grade 1 (annealed) and Grade 2 (solution annealed). Bar certification alone does not define a finished fastener — name the product standard, grade and any project fastener requirements on the order.
STRENGTH / CONDITION / PRODUCT FORM
| Grade / condition | Tensile min (ksi) | Yield 0.2% min (ksi) | Elongation min (%) |
|---|---|---|---|
| Grade 1, annealed (≤ 4 in) | 120 | 60 | 30 |
| Grade 2, solution annealed | 100 | 40 | 30 |
Values per ASTM B446, for orientation. The edition named on your purchase order governs acceptance.
HEAT CHEMISTRY / COMPOSITION LIMITS
Nominal composition (range midpoints, orientation only)
| Element | Symbol | Min % | Max % |
|---|---|---|---|
| Nickel | Ni | 58.0 | — |
| Chromium | Cr | 20.0 | 23.0 |
| Molybdenum | Mo | 8.0 | 10.0 |
| Niobium + Tantalum | Nb+Ta | 3.15 | 4.15 |
| Iron | Fe | — | 5.0 |
| Cobalt | Co | — | 1.0 |
| Manganese | Mn | — | 0.50 |
| Silicon | Si | — | 0.50 |
| Aluminium | Al | — | 0.40 |
| Titanium | Ti | — | 0.40 |
| Carbon | C | — | 0.10 |
| Phosphorus | P | — | 0.015 |
| Sulfur | S | — | 0.015 |
Values per ASTM B446, for orientation. The edition named on your purchase order governs acceptance.
PURCHASE ORDER / ACCEPTANCE RECORDS
Ni-Cr-Mo-Nb rod and bar — the raw-material reference for machined 625 fasteners.
ASME Section II adoption of B446 for pressure-equipment schedules.
Plate, sheet and pipe forms where parts are machined from other product forms.
Sour-service acceptance depends on condition and environment, not the alloy name.
Inspection document type, PMI and witness scope stated on the RFQ.
SPECIALISED INDUSTRIAL PROCUREMENT
EMG reviews Inconel 625 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.
Alloy 625 is a nickel-chromium-molybdenum-niobium alloy primarily strengthened by solid solution. Its role in corrosion-exposed hardware differs from precipitation-hardening grades such as 718 and 725.
EMG reviews Inconel 625 requirements through qualified supply partners. Include the drawing revision, quantity, material condition and required site date so sourcing and documentation can be defined before an order is placed.
Explore the materials reference
UNS N06625
Corrosion-resistant bolting · process equipment
Specify the product form and annealing condition. ASTM B446 bar requirements do not, by themselves, define a finished fastener standard.
Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

Specified bolts, studs, nuts and valve parts where the approved design calls for Alloy 625 corrosion performance.

Studs, hex bolts and companion nuts in Inconel 625 to the approved drawing. Confirm thread form, length, mating material and any coating requirements.

Shafts, sleeves, collars and valve parts supplied through qualified manufacturing partners. Fits, surface finish, treatment and usable capacity are confirmed per enquiry.
Specify the product form and annealing condition. ASTM B446 bar requirements do not, by themselves, define a finished fastener standard.
625 is not an automatic replacement for 718: alloy chemistry, strengthening mechanism and acceptance properties differ.
State the required chemical, mechanical, hardness and dimensional records. Request EN 10204 3.1 / 3.2, PMI or witness inspection where the project requires them; the quotation must identify the agreed scope.
Alloy 625 is a nickel-chromium-molybdenum-niobium alloy primarily strengthened by solid solution. Its role in corrosion-exposed hardware differs from precipitation-hardening grades such as 718 and 725.
Specify the product form and annealing condition. ASTM B446 bar requirements do not, by themselves, define a finished fastener standard. Include dimensions or drawing revision, quantity, inspection scope and the required site date.
EMG accepts specification-led enquiries for industrial fasteners and components. Product form, sourcing, partner capacity, certification and lead time are confirmed at quotation; this page does not establish stock or guaranteed service suitability.
625 is not an automatic replacement for 718: alloy chemistry, strengthening mechanism and acceptance properties differ.
No. ASTM B446 is a bar/product-form reference. Define the finished component drawing, supplied condition, dimensions, mechanical acceptance and inspection requirements separately.
For Inconel 625 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.
Revision, thread form, fits and surface finish.
UNS, product standard, heat treatment and service requirements.
Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.
Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.
Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.
Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.
24/7 availability for critical projects