Nitronic 60 / Alloy 218
S21800
Anti-galling austenitic stainless for selected threaded, sliding and wear-contact parts.
Specify product form, material condition, required properties and the mating material.

Chemistry, properties & fasteners
A silicon-manganese austenitic stainless steel known for galling resistance — supplied as valve stems, pins, wear parts and threaded components to drawing.
Request a QuoteGrade · condition · drawing · traceability
EMG / MATERIAL DOSSIER
Nitronic 60 (UNS S21800) adds about 4% silicon and 8% manganese with nitrogen to an austenitic stainless base. The chemistry gives notable resistance to galling and wear in metal-to-metal contact.
ASTM A276 and A479 list S21800 bar. Specify the condition, section size and any hardness requirements on the order.
STRENGTH / CONDITION / PRODUCT FORM
| Condition | Tensile min (ksi) | Yield 0.2% min (ksi) | Elongation min (%) |
|---|---|---|---|
| Annealed | 95 | 50 | 35 |
Values per ASTM A276, for orientation. The edition named on your purchase order governs acceptance.
HEAT CHEMISTRY / COMPOSITION LIMITS
Nominal composition (range midpoints, orientation only)
| Element | Symbol | Min % | Max % |
|---|---|---|---|
| Chromium | Cr | 16.0 | 18.0 |
| Nickel | Ni | 8.0 | 9.0 |
| Manganese | Mn | 7.0 | 9.0 |
| Silicon | Si | 3.5 | 4.5 |
| Nitrogen | N | 0.08 | 0.18 |
| Carbon | C | — | 0.10 |
| Phosphorus | P | — | 0.060 |
| Sulfur | S | — | 0.030 |
| Iron | Fe | Balance | — |
Values per ASTM A276, for orientation. The edition named on your purchase order governs acceptance.
PURCHASE ORDER / ACCEPTANCE RECORDS
Stainless bar and shapes, including S21800.
Stainless bar for pressure-equipment use, including S21800.
Inspection document type, PMI and witness scope stated on the RFQ.
SPECIALISED INDUSTRIAL PROCUREMENT
EMG reviews Nitronic 60 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.
Nitronic 60 (UNS S21800) is a nitrogen-strengthened austenitic stainless steel with elevated silicon and manganese additions. It is recognised for resistance to galling and wear in selected metal-to-metal contact applications.
Anti-galling does not mean galling-proof. Contact load, mating alloy, surface finish, lubrication and assembly practice still matter. EMG reviews specified Nitronic 60 fasteners and machined parts as an engineered assembly requirement, not a blanket replacement for conventional stainless.
Explore the materials reference
S21800
Anti-galling austenitic stainless for selected threaded, sliding and wear-contact parts.
Specify product form, material condition, required properties and the mating material.
Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

Specified bolts, nuts and threaded components subject to repeated assembly or stainless-on-stainless contact.

Sliding-contact parts where galling resistance is an explicit design requirement.

Shafts, pins, bushes and sleeves with controlled fits, finishes and mating-pair selection.
Review thread engagement, surface finish, contact stress, lubrication and installation practice alongside the material. No alloy eliminates every seizure mechanism.
Nitronic 50 and Nitronic 60 are different alloys with different UNS identifiers and performance priorities. A brand-family name is not sufficient for a purchase order.
Wear resistance does not establish suitability for seawater, concentrated chemicals or sour service. Confirm the actual exposure and acceptance requirements.
Nitronic 60 is considered where galling and wear are concerns, including selected threaded assemblies and repeated assembly applications. Suitability depends on the joint design, mating material, lubrication and operating conditions.
No. It offers galling resistance, not a guarantee against seizure. Contact load, finish, mating alloy and assembly practice must still be controlled.
No. Nitronic 60 is UNS S21800; Nitronic 50 is UNS S20910. The grades cannot be treated as interchangeable.
No. Nitronic 60 offers galling resistance, not a guarantee. Specify the mating material, thread geometry, contact load, finish, lubrication and approved assembly practice.
For Nitronic 60 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.
Revision, thread form, fits and surface finish.
UNS, product standard, heat treatment and service requirements.
Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.
Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.
Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.
Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.
24/7 availability for critical projects