Quotes typically within 24 hours
    ASTM B637 UNS N07718 bolts in blue protective mesh sleeves with EMG product label

    UNS N07718 / ENGINEERED SUPPLY

    Inconel 718 Hex Bolts

    Inconel 718 hex bolt enquiries for drawing-controlled power, valve and oil & gas equipment. Define the final heat treatment, mechanical acceptance and head geometry before supply.

    Request a Project Quote

    BUY-TO-ORDER · QUOTED LEAD TIME · AUSTRALIA-WIDE

    MATERIAL
    UNS N07718
    GEOMETRY
    Drawing-controlled
    CONDITION
    Specified per project
    SUPPLY
    Buy-to-order

    ALLOY / CONDITION / GEOMETRY

    Strength starts with the treatment.

    Inconel 718 hex bolts are specified by alloy identity, material condition and finished-part acceptance—not by a trade name alone.

    Solution treatment, ageing route, hardness and mechanical acceptance must be specified together. The 718 name alone does not define the finished bolt’s properties.

    Specify standard hex or heavy hex heads, across-flats dimensions, full or partial thread, thread fit, grip length and overall length. A headed bolt is not a drop-in replacement for a stud assembly.

    Inconel 718 material reference
    ASTM B637 UNS N07718 bolts in blue protective mesh sleeves with EMG product label
    Owner-supplied Inconel 718 nut photograph · companion-product example, not a hex bolt or stock listing

    MATERIAL IS NOT THE FINISHED BOLT

    Separate the standards. Protect the purchase.

    ASTM B637 is a material reference for precipitation-hardening nickel alloy products. Include the finished-bolt requirements and any applicable API 6ACRA or legacy API 6A718 purchase requirements; these are not blanket certifications.

    No automatic alloy substitutions.

    Inconel 718 and 625 are not interchangeable. 718 develops strength through precipitation hardening; 625 is primarily solid-solution strengthened. Joint design and service requirements govern selection.

    SPECIALISED INDUSTRIAL PROCUREMENT

    Inconel 718 fasteners. A complete requirement.

    EMG reviews Inconel 718 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.

    ACTUAL EMG PROJECT

    Inconel 718 power-station studs and nuts

    See the supplied companion components and the client’s recorded requirements. A past project is evidence of that job, not a promise of current inventory or an identical hex bolt specification.

    Read the Case Study

    ENGINEERED SUPPLY, NOT OFF-THE-SHELF

    The details that make a quotation usable.

    01 / Drawing

    Head style, diameter, thread, grip, length, drawing revision and quantity.

    02 / Material

    UNS N07718, specified condition, mating components and service environment.

    03 / Acceptance

    Required EN 10204 3.1 / 3.2 records, mechanical or corrosion tests, witness scope and site date.

    PROCUREMENT ANSWERS

    Ordering Inconel 718 hex bolts.

    EMG accepts Inconel 718 hex bolt enquiries from Australian engineering, procurement and industrial maintenance teams. Supply is buy-to-order with quoted lead time; grade, size, manufacturing route, inspection and delivery are confirmed per RFQ. This is specialised industrial supply, not general hardware or automotive repair supply.

    No. ASTM B637 is a nickel-alloy material specification; API equipment material requirements are separate. State the required edition, condition and finished-fastener acceptance criteria. A B637 bar certificate alone does not establish API conformity.

    Include UNS N07718, material condition, drawing revision, head style, diameter, thread form and fit, grip and overall length, quantity, mating nuts or washers, inspection records and required site date. Solution treatment, ageing route, hardness and mechanical acceptance must be specified together. The 718 name alone does not define the finished bolt’s properties.

    EMG’s overall fastener enquiry range is M5 to M150 and 1/4 inch to 6 inch. It is not an availability guarantee for every alloy or product. Grade-specific size feasibility and the applicable dimensional standard are confirmed at quotation.

    No. Where applicable, NACE MR0175 / ISO 15156 service requirements and NORSOK manufacturing qualification must be assessed against the specified condition, environment and required records. No blanket approval is implied.

    FOR ENGINEERING & PROCUREMENT TEAMS

    Your Inconel 718 hex bolt requirement.

    Attach the drawing or bolting schedule. EMG manages supply through qualified manufacturing partners; feasibility, documentation and delivery are confirmed against your enquiry.

    OVERALL ENQUIRY RANGE: 1/4"–6" / M5–M150
    Grade-specific size feasibility confirmed per RFQ.

    Specialised industrial project supply—not general hardware, domestic trade supplies or automotive repairs.

    sales@energymaterialsgroup.com

    Quotes typically within 24 hours.

    Alloy identification references

    Inconel 718 — producer material reference

    Producer references support alloy identification, not finished-part certification. INCONEL and HASTELLOY are trademarks of their respective owners; no authorised affiliation is implied. Photographs show historical component examples, not inventory.

    GET IN TOUCH

    Ready to Source Your Next Project?

    Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects