Duplex 2205
UNS S31803 / S32205
Chloride-exposed bolts · pump and valve parts
Specify UNS, product form and governing standard. ASTM A182 F51 is a forging designation, not a blanket finished-bolt specification.

Chemistry, properties & fasteners
A 22% chromium, 5% nickel, 3% molybdenum duplex stainless with a nitrogen addition — specified as studs, hex bolts, nuts and parts to drawing for chloride-exposed process, water and offshore equipment.
Request a QuoteGrade · condition · drawing · traceability
Real EMG-supplied components — not catalogue renders. Markings help identification; the material certificate verifies the supplied grade.




EMG quotes 2205 hex bolts, S32205 stud bolts, S31803 nuts and duplex washers for oil and gas, LNG, desalination and process plant teams in every state. Supply is buy-to-order with a quoted lead time; delivery is confirmed per RFQ.
Perth · Kwinana · Karratha · Dampier · Port Hedland
Brisbane · Gladstone · Curtis Island · Townsville
Darwin · Middle Arm · Bonaparte Basin
Melbourne · Geelong · Gippsland · Bass Strait
Sydney · Newcastle · Port Kembla
Adelaide · Cooper Basin · Port Bonython
EMG / MATERIAL DOSSIER
Duplex 2205 is balanced to solidify as roughly half ferrite and half austenite. The mixed structure gives about double the minimum yield strength of 316 stainless, with better resistance to chloride pitting and stress-corrosion cracking than common austenitic grades.
UNS S32205 is a tighter-chemistry version within the S31803 range, with higher chromium, molybdenum and nitrogen minimums. ASTM A1082 covers 2205 bolting; ASTM A276 / A479 cover bar, and ASTM A182 F51 / F60 are forging designations. Name the permitted UNS on the purchase order — dual certification is never assumed.
STRENGTH / CONDITION / PRODUCT FORM
| UNS | Tensile min (ksi) | Yield min (ksi) | Elongation min (%) | Hardness max |
|---|---|---|---|---|
| S31803 | 90 | 65 | 25 | 30 HRC / 290 HBW |
| S32205 | 95 | 65 | 25 | 30 HRC / 290 HBW |
Solution annealed and water quenched; duplex grades are not hardened by heat treatment. Values per ASTM A1082, for orientation. The edition named on your purchase order governs acceptance.
HEAT CHEMISTRY / COMPOSITION LIMITS
Nominal composition (range midpoints, orientation only)
| Element | Symbol | Min % | Max % |
|---|---|---|---|
| Chromium | Cr | 22.0 | 23.0 |
| Nickel | Ni | 4.5 | 6.5 |
| Molybdenum | Mo | 3.0 | 3.5 |
| Nitrogen | N | 0.14 | 0.20 |
| Manganese | Mn | — | 2.00 |
| Silicon | Si | — | 1.00 |
| Carbon | C | — | 0.030 |
| Phosphorus | P | — | 0.030 |
| Sulfur | S | — | 0.020 |
| Iron | Fe | Balance | — |
S32205 limits shown. S31803 permits Cr 21.0–23.0, Mo 2.5–3.5 and N 0.08–0.20. Values per ASTM A1082, for orientation. The edition named on your purchase order governs acceptance.
PURCHASE ORDER / ACCEPTANCE RECORDS
Duplex and precipitation-hardening stainless steel bolting — the finished-fastener reference for 2205.
2205 bar product forms from which studs, bolts and machined parts are produced.
Forged duplex flanges and fittings that the bolting is matched to — not a finished-bolt certification.
Sour-service material requirements; acceptance depends on the stated limits and supplied condition.
Offshore material data sheets and manufacturer qualification, where the project specifies them.
Inspection document type for heat traceability, chemistry and mechanical test results.
SPECIALISED INDUSTRIAL PROCUREMENT
EMG reviews Duplex 2205 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.
2205 duplex stainless combines austenitic and ferritic phases. UNS S31803 and S32205 are related but separately defined designations; the purchase specification must identify the permitted grade.
EMG reviews Duplex 2205 requirements through qualified supply partners. Include the drawing revision, quantity, material condition and required site date so sourcing and documentation can be defined before an order is placed.
Explore the materials reference
UNS S31803 / S32205
Chloride-exposed bolts · pump and valve parts
Specify UNS, product form and governing standard. ASTM A182 F51 is a forging designation, not a blanket finished-bolt specification.
Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

Drawing-defined bolting, shafts and valve parts in chloride-exposed equipment where duplex 2205 has been selected by the designer.

Studs, hex bolts and companion nuts in Duplex 2205 to the approved drawing. Confirm thread form, length, mating material and any coating requirements.

Shafts, sleeves, collars and valve parts supplied through qualified manufacturing partners. Fits, surface finish, treatment and usable capacity are confirmed per enquiry.
Specify UNS, product form and governing standard. ASTM A182 F51 is a forging designation, not a blanket finished-bolt specification.
Do not infer dual certification between S31803 and S32205. Heat treatment, phase balance and required corrosion tests need appropriate records.
State the required chemical, mechanical, hardness and dimensional records. Request EN 10204 3.1 / 3.2, PMI or witness inspection where the project requires them; the quotation must identify the agreed scope.
2205 duplex stainless combines austenitic and ferritic phases. UNS S31803 and S32205 are related but separately defined designations; the purchase specification must identify the permitted grade.
Specify UNS, product form and governing standard. ASTM A182 F51 is a forging designation, not a blanket finished-bolt specification. Include dimensions or drawing revision, quantity, inspection scope and the required site date.
EMG accepts specification-led enquiries for industrial fasteners and components. Product form, sourcing, partner capacity, certification and lead time are confirmed at quotation; this page does not establish stock or guaranteed service suitability.
Do not infer dual certification between S31803 and S32205. Heat treatment, phase balance and required corrosion tests need appropriate records.
No. F51 is a forging designation. Specify the permitted UNS, finished component standard or drawing, treatment, dimensions and required inspection; do not infer dual certification between S31803 and S32205.
For Duplex 2205 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.
Revision, thread form, fits and surface finish.
UNS, product standard, heat treatment and service requirements.
Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.
Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.
Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.
Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.
24/7 availability for critical projects