Quotes typically within 24 hours
    B7M collar bolt and matching nuts illustrating custom fastener geometry, not the featured alloy
    Super duplex stainless steel

    Super Duplex S32760 (UNS S32760)

    Chemistry, properties & fasteners

    A 25% chromium super duplex with copper and tungsten additions, specified as F55 — studs, hex bolts, U-bolts, nuts and parts to drawing for offshore and seawater service.

    Request a Quote
    UNS S32760

    Grade · condition · drawing · traceability

    ENGINEERED SUPPLY, NOT OFF-THE-SHELFQUALIFIED PARTNER NETWORKLEAD TIME CONFIRMED PER RFQ
    EMG / PROJECT EVIDENCE

    Super Duplex S32760 (F55) parts, photographed.

    Real EMG-supplied components — not catalogue renders. Markings help identification; the material certificate verifies the supplied grade.

    Super duplex S32760 U-bolts supplied by EMG for offshore pipe supports
    S32760 U-bolts supplied for offshore pipe-support infrastructure
    S32760 offshore U-bolts case study
    EMG / AUSTRALIAN INDUSTRIAL SUPPLY

    Super Duplex S32760 (F55) fasteners across Australia.

    EMG quotes S32760 hex bolts, S32760 stud bolts, F55 nuts and Zeron 100 U-bolts for oil and gas, LNG, desalination and process plant teams in every state. Supply is buy-to-order with a quoted lead time; delivery is confirmed per RFQ.

    EMG / MATERIAL DOSSIER

    The specification behind the part.

    UNS
    S32760
    Tensile, A1082
    109 ksi min
    Yield, A1082
    80 ksi min
    Hardness, A1082
    30 HRC max
    PREN (specified)
    ≥ 40
    Forging grade
    ASTM A182 F55

    Alloy identity. Product requirements.

    UNS S32760 adds 0.5–1.0% each of copper and tungsten to a 25% chromium super duplex base. It is often referred to by the trade name Zeron 100, and specifications commonly require a minimum PREN of 40 calculated from heat chemistry.

    ASTM A1082 covers S32760 bolting at 109 ksi minimum tensile and 80 ksi minimum yield. ASTM A182 F55 is the forging designation. S32760 is a separate UNS designation from S32750 (2507) — certificates for one do not support a purchase order for the other, and a trade name does not establish the manufacturing route.

    STRENGTH / CONDITION / PRODUCT FORM

    Mechanical properties

    Super duplex S32760 bolting — ASTM A1082

    Super duplex S32760 bolting — ASTM A1082
    SizeTensile min (ksi)Yield min (ksi)Elongation min (%)Hardness max
    All sizes109802530 HRC / 290 HBW

    Solution annealed and water quenched; not hardenable by heat treatment. Values per ASTM A1082, for orientation. The edition named on your purchase order governs acceptance.

    HEAT CHEMISTRY / COMPOSITION LIMITS

    Chemical composition

    Nominal composition (range midpoints, orientation only)

    • Fe ≈ 61.7%
    • Cr ≈ 25%
    • Ni ≈ 7%
    • Mo ≈ 3.5%
    • Cu ≈ 0.75%
    • W ≈ 0.75%
    • Other ≈ 1.3%
    Super Duplex S32760 chemical composition limits
    ElementSymbolMin %Max %
    ChromiumCr24.026.0
    NickelNi6.08.0
    MolybdenumMo3.04.0
    NitrogenN0.200.30
    CopperCu0.501.00
    TungstenW0.501.00
    ManganeseMn—1.00
    SiliconSi—1.00
    CarbonC—0.030
    PhosphorusP—0.030
    SulfurS—0.010
    IronFeBalance—

    PREN = %Cr + 3.3 × %Mo + 16 × %N ≥ 40. Values per ASTM A1082, for orientation. The edition named on your purchase order governs acceptance.

    PURCHASE ORDER / ACCEPTANCE RECORDS

    Standards & documentation

    ASTM A1082

    Duplex stainless steel bolting — the finished-fastener reference for S32760.

    ASTM A276 / A479

    S32760 bar product forms for studs, bolts, U-bolts and machined parts.

    ASTM A182 F55

    Forged S32760 flanges and fittings — keep F55 and F53 distinct.

    NACE MR0175 / ISO 15156

    Sour-service requirements; suitability depends on the stated limits and supplied condition.

    NORSOK M-630 / M-650

    Offshore material data sheets and qualified manufacturers, where specified.

    EN 10204 3.1 / 3.2

    Inspection documents; request PMI, ferrite and ASTM G48 records where required.

    SPECIALISED INDUSTRIAL PROCUREMENT

    Super Duplex S32760 fasteners. A complete requirement.

    EMG reviews Super Duplex S32760 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.

    MATERIAL / APPLICATION / CONDITION

    S32760: keep F55 and F53 distinct

    S32760 is a super duplex stainless designation with copper and tungsten additions. It is distinct from S32750 and must be procured against the correct product-form and processing requirements.

    EMG reviews Super Duplex S32760 requirements through qualified supply partners. Include the drawing revision, quantity, material condition and required site date so sourcing and documentation can be defined before an order is placed.

    Explore the materials reference
    Duplex machined valve body illustrating valve-component geometry, not the featured alloy
    EMG component imagery. Photographs illustrate component types; the material certificate verifies the supplied grade.
    PROCUREMENT REFERENCE

    What to specify

    Super Duplex S32760

    UNS S32760

    Seawater fasteners · offshore components

    RFQ CHECK

    Specify S32760, the governing product standard, heat treatment, inspection and any project-specific qualification requirements. F55 is a forging designation.

    Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

    WHERE THE SPECIFICATION MATTERS

    Engineered around the application

    Offshore oil and gas platform

    Marine and offshore maintenance

    Studs, U-bolts, nuts and drawing-controlled components where the approved design specifically requires S32760.

    Socket head cap screws illustrating threaded-component applications

    Fastener assemblies

    Studs, hex bolts and companion nuts in Super Duplex S32760 to the approved drawing. Confirm thread form, length, mating material and any coating requirements.

    Precision-machined shafts, housings and threaded components illustrating component applications

    Parts to drawing

    Shafts, sleeves, collars and valve parts supplied through qualified manufacturing partners. Fits, surface finish, treatment and usable capacity are confirmed per enquiry.

    ENGINEERING CHECKPOINTS

    Control the details that matter.

    01

    The product specification governs

    Specify S32760, the governing product standard, heat treatment, inspection and any project-specific qualification requirements. F55 is a forging designation.

    02

    No automatic substitutions

    A reference to ZERON 100 does not establish branded origin or a qualified manufacturing route. Confirm manufacturer identity and required qualification records.

    03

    Verify the finished part

    State the required chemical, mechanical, hardness and dimensional records. Request EN 10204 3.1 / 3.2, PMI or witness inspection where the project requires them; the quotation must identify the agreed scope.

    MATERIAL QUESTIONS

    Ordering Super Duplex S32760

    What is Super Duplex S32760?

    S32760 is a super duplex stainless designation with copper and tungsten additions. It is distinct from S32750 and must be procured against the correct product-form and processing requirements.

    What should a Super Duplex S32760 RFQ include?

    Specify S32760, the governing product standard, heat treatment, inspection and any project-specific qualification requirements. F55 is a forging designation. Include dimensions or drawing revision, quantity, inspection scope and the required site date.

    Can EMG supply Super Duplex S32760 bolts and machined parts?

    EMG accepts specification-led enquiries for industrial fasteners and components. Product form, sourcing, partner capacity, certification and lead time are confirmed at quotation; this page does not establish stock or guaranteed service suitability.

    Can I substitute a related alloy?

    A reference to ZERON 100 does not establish branded origin or a qualified manufacturing route. Confirm manufacturer identity and required qualification records.

    Can S32750 certificates support an S32760 purchase order?

    No. S32750 and S32760 are separate UNS designations. Verify the specified S32760 identity, product form, processing and required qualification records for each component.

    YOUR SPECIFICATION. OUR SUPPLY NETWORK.

    Send the requirement.
    Get a defined supply route.

    For Super Duplex S32760 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.

    Drawing & dimensions

    Revision, thread form, fits and surface finish.

    Material & condition

    UNS, product standard, heat treatment and service requirements.

    Inspection & records

    Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.

    Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.

    Quotes typically within 24 hours.

    Connected capabilities

    TECHNICAL REFERENCES

    Super Duplex S32760 — producer material reference

    Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.

    GET IN TOUCH

    Ready to Source Your Next Project?

    Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects