Super Duplex 2507
UNS S32750
Offshore bolting · seawater equipment
State the UNS designation, product standard, solution-treatment requirements and applicable corrosion, microstructure and inspection tests.

Chemistry, properties & fasteners
A 25% chromium, 7% nickel, 4% molybdenum super duplex with high nitrogen — the strongest common duplex grade, specified for seawater, offshore and high-chloride studs, hex bolts, nuts and washers.
Request a QuoteGrade · condition · drawing · traceability
Real EMG-supplied components — not catalogue renders. Markings help identification; the material certificate verifies the supplied grade.




EMG quotes 2507 hex bolts, S32750 stud bolts, super duplex nuts and washers for oil and gas, LNG, desalination and process plant teams in every state. Supply is buy-to-order with a quoted lead time; delivery is confirmed per RFQ.
Perth · Kwinana · Karratha · Dampier · Port Hedland
Brisbane · Gladstone · Curtis Island · Townsville
Darwin · Middle Arm · Bonaparte Basin
Melbourne · Geelong · Gippsland · Bass Strait
Sydney · Newcastle · Port Kembla
Adelaide · Cooper Basin · Port Bonython
EMG / MATERIAL DOSSIER
Super duplex 2507 (UNS S32750) raises chromium, molybdenum and nitrogen above 2205, giving a PREN commonly quoted at 41 or more for bar to ASTM A276 / A479. That chemistry is why it is written into seawater, firewater, subsea and produced-water bolting specifications.
ASTM A1082 covers S32750 bolting with an 80 ksi minimum yield in sizes to 2 inches. A1082 itself sets no PREN for S32750, so a PREN requirement must state its formula and be verified from heat chemistry. ASTM A182 F53 is a forging reference; S32750 and S32760 are not interchangeable by default.
STRENGTH / CONDITION / PRODUCT FORM
| Size | Tensile min (ksi) | Yield min (ksi) | Elongation min (%) | Hardness max |
|---|---|---|---|---|
| 2 in and under | 116 | 80 | 15 | 33 HRC / 310 HBW |
| Over 2 in | 110 | 75 | 15 | 33 HRC / 310 HBW |
Solution annealed and water quenched; not hardenable by heat treatment. Values per ASTM A1082, for orientation. The edition named on your purchase order governs acceptance.
HEAT CHEMISTRY / COMPOSITION LIMITS
Nominal composition (range midpoints, orientation only)
| Element | Symbol | Min % | Max % |
|---|---|---|---|
| Chromium | Cr | 24.0 | 26.0 |
| Nickel | Ni | 6.0 | 8.0 |
| Molybdenum | Mo | 3.0 | 5.0 |
| Nitrogen | N | 0.24 | 0.32 |
| Manganese | Mn | — | 1.20 |
| Silicon | Si | — | 0.80 |
| Copper | Cu | — | 0.50 |
| Carbon | C | — | 0.030 |
| Phosphorus | P | — | 0.035 |
| Sulfur | S | — | 0.020 |
| Iron | Fe | Balance | — |
Values per ASTM A1082, for orientation. The edition named on your purchase order governs acceptance.
PURCHASE ORDER / ACCEPTANCE RECORDS
Duplex stainless steel bolting — the finished-fastener reference for S32750.
S32750 bar product forms for studs, bolts and machined components.
Forged super duplex flanges and fittings — a product-form reference, not a bolt certificate.
Sour-service requirements; suitability depends on the stated limits and supplied condition.
Offshore material data sheets and qualified manufacturers, where specified.
Inspection documents; request PMI, ferrite and ASTM G48 records where the project requires them.
SPECIALISED INDUSTRIAL PROCUREMENT
EMG reviews Super Duplex 2507 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.
A loyal oil and gas client needed SAF 2507 stud bolts, nuts and washers in Australia, with a specified PREN above 40. The requirement covered the whole package—not just the stud.
See the actual project parts, from heavy hex nuts and washers to the mesh-protected studding, and the material details that matter when specifying a similar order.
Read the Case Study
PREN above 40 was the client's requirement; markings and photographs are not material certificates. Similar supply is buy-to-order, with quoted lead time.
2507 is a highly alloyed duplex stainless identified as UNS S32750. Bolting and machined parts need a controlled material and processing route, not just a super-duplex family label.
EMG reviews Super Duplex 2507 requirements through qualified supply partners. Include the drawing revision, quantity, material condition and required site date so sourcing and documentation can be defined before an order is placed.
Explore the materials reference
UNS S32750
Offshore bolting · seawater equipment
State the UNS designation, product standard, solution-treatment requirements and applicable corrosion, microstructure and inspection tests.
Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

Specified studs, nuts, shafts and valve parts for seawater and offshore equipment with an approved S32750 material schedule.

Studs, hex bolts and companion nuts in Super Duplex 2507 to the approved drawing. Confirm thread form, length, mating material and any coating requirements.

Shafts, sleeves, collars and valve parts supplied through qualified manufacturing partners. Fits, surface finish, treatment and usable capacity are confirmed per enquiry.
State the UNS designation, product standard, solution-treatment requirements and applicable corrosion, microstructure and inspection tests.
ASTM A182 F53 is a forging designation. S32750 and S32760 are not interchangeable by default, and alloy identity does not demonstrate NORSOK qualification.
State the required chemical, mechanical, hardness and dimensional records. Request EN 10204 3.1 / 3.2, PMI or witness inspection where the project requires them; the quotation must identify the agreed scope.
2507 is a highly alloyed duplex stainless identified as UNS S32750. Bolting and machined parts need a controlled material and processing route, not just a super-duplex family label.
State the UNS designation, product standard, solution-treatment requirements and applicable corrosion, microstructure and inspection tests. Include dimensions or drawing revision, quantity, inspection scope and the required site date.
EMG accepts specification-led enquiries for industrial fasteners and components. Product form, sourcing, partner capacity, certification and lead time are confirmed at quotation; this page does not establish stock or guaranteed service suitability.
ASTM A182 F53 is a forging designation. S32750 and S32760 are not interchangeable by default, and alloy identity does not demonstrate NORSOK qualification.
State UNS S32750 for each specified component, finished geometry, solution treatment, inspection and any project qualification requirements. F53 is a forging reference, not a complete assembly specification.
For Super Duplex 2507 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.
Revision, thread form, fits and surface finish.
UNS, product standard, heat treatment and service requirements.
Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.
Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.
Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.
Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.
24/7 availability for critical projects