Quotes typically within 24 hours
    Three EMG hex bolt heads marked S32205

    UNS S31803 / S32205 / ENGINEERED SUPPLY

    Duplex 2205 Hex Bolts

    Duplex 2205 hex bolts for drawing-led pump, valve, water-handling and industrial process equipment. State the permitted UNS designation rather than assuming dual certification.

    Request a Project Quote

    BUY-TO-ORDER · QUOTED LEAD TIME · AUSTRALIA-WIDE

    MATERIAL
    UNS S31803 / S32205
    GEOMETRY
    Drawing-controlled
    CONDITION
    Specified per project
    SUPPLY
    Buy-to-order

    ALLOY / CONDITION / GEOMETRY

    Two designations. One precise enquiry.

    Duplex 2205 hex bolts are specified by alloy identity, material condition and finished-part acceptance—not by a trade name alone.

    S31803 and S32205 are separately defined UNS designations. Specify the permitted alloy, solution treatment, mechanical properties and any corrosion or microstructure tests.

    Specify standard hex or heavy hex heads, across-flats dimensions, full or partial thread, thread fit, grip length and overall length. A headed bolt is not a drop-in replacement for a stud assembly.

    Duplex 2205 material reference
    Three EMG hex bolt heads marked S32205
    Owner-supplied duplex bolt photograph · markings are not a substitute for material certificates

    MATERIAL IS NOT THE FINISHED BOLT

    Separate the standards. Protect the purchase.

    ASTM A1082 is a duplex bolting reference where its applicable grade and condition are specified. ASTM A276 / A479 cover bar product forms; ASTM A182 F51 is a forging designation and does not alone define a finished bolt.

    No automatic alloy substitutions.

    Duplex 2205 and super duplex 2507 have different alloy compositions and acceptance requirements. A shared duplex family does not establish interchangeability or service suitability.

    SPECIALISED INDUSTRIAL PROCUREMENT

    Duplex 2205 fasteners. A complete requirement.

    EMG reviews Duplex 2205 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.

    ENGINEERED SUPPLY, NOT OFF-THE-SHELF

    The details that make a quotation usable.

    01 / Drawing

    Head style, diameter, thread, grip, length, drawing revision and quantity.

    02 / Material

    UNS S31803 / S32205, specified condition, mating components and service environment.

    03 / Acceptance

    Required EN 10204 3.1 / 3.2 records, mechanical or corrosion tests, witness scope and site date.

    PROCUREMENT ANSWERS

    Ordering Duplex 2205 hex bolts.

    EMG accepts Duplex 2205 hex bolt enquiries from Australian engineering, procurement and industrial maintenance teams. Supply is buy-to-order with quoted lead time; grade, size, manufacturing route, inspection and delivery are confirmed per RFQ. This is specialised industrial supply, not general hardware or automotive repair supply.

    No. They are separately defined UNS designations. Dual certification must be supported by the supplied material records against the applicable specifications; a 2205 label alone is insufficient.

    Include UNS S31803 / S32205, material condition, drawing revision, head style, diameter, thread form and fit, grip and overall length, quantity, mating nuts or washers, inspection records and required site date. S31803 and S32205 are separately defined UNS designations. Specify the permitted alloy, solution treatment, mechanical properties and any corrosion or microstructure tests.

    EMG’s overall fastener enquiry range is M5 to M150 and 1/4 inch to 6 inch. It is not an availability guarantee for every alloy or product. Grade-specific size feasibility and the applicable dimensional standard are confirmed at quotation.

    No. Where applicable, NACE MR0175 / ISO 15156 service requirements and NORSOK manufacturing qualification must be assessed against the specified condition, environment and required records. No blanket approval is implied.

    FOR ENGINEERING & PROCUREMENT TEAMS

    Your Duplex 2205 hex bolt requirement.

    Attach the drawing or bolting schedule. EMG manages supply through qualified manufacturing partners; feasibility, documentation and delivery are confirmed against your enquiry.

    OVERALL ENQUIRY RANGE: 1/4"–6" / M5–M150
    Grade-specific size feasibility confirmed per RFQ.

    Specialised industrial project supply—not general hardware, domestic trade supplies or automotive repairs.

    sales@energymaterialsgroup.com

    Quotes typically within 24 hours.

    Alloy identification references

    Duplex 2205 — producer material reference

    Producer references support alloy identification, not finished-part certification. INCONEL and HASTELLOY are trademarks of their respective owners; no authorised affiliation is implied. Photographs show historical component examples, not inventory.

    GET IN TOUCH

    Ready to Source Your Next Project?

    Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects