Quotes typically within 24 hours
    Incoloy 825 hex bolts protected in blue mesh; nickel-alloy project reference, not verified stock of the featured alloy
    Nickel-iron-chromium alloy

    Incoloy 825 (UNS N08825)

    Chemistry, properties & fasteners

    A nickel-iron-chromium alloy with molybdenum, copper and titanium — supplied as bolts, studs and parts to drawing for selected acid and oil-and-gas process equipment.

    Request a Quote
    UNS N08825

    Grade · condition · drawing · traceability

    ENGINEERED SUPPLY, NOT OFF-THE-SHELFQUALIFIED PARTNER NETWORKLEAD TIME CONFIRMED PER RFQ

    EMG / MATERIAL DOSSIER

    The specification behind the part.

    UNS
    N08825
    Tensile, B425 annealed
    85 ksi min
    Yield, B425 annealed
    35 ksi min
    Elongation
    30% min
    Stabilised
    Titanium
    Magnetic
    No

    Alloy identity. Product requirements.

    Incoloy 825 (UNS N08825) balances about 42% nickel, 21.5% chromium, 3% molybdenum and 2% copper in an iron base, with titanium to stabilise against sensitisation.

    ASTM B425 covers 825 rod and bar. There is no dedicated 825 finished-fastener standard in F468, so project fastener requirements must be stated on the order.

    STRENGTH / CONDITION / PRODUCT FORM

    Mechanical properties

    Rod & bar — ASTM B425

    Rod & bar — ASTM B425
    ConditionTensile min (ksi)Yield 0.2% min (ksi)Elongation min (%)
    Annealed853530

    Values per ASTM B425, for orientation. The edition named on your purchase order governs acceptance.

    HEAT CHEMISTRY / COMPOSITION LIMITS

    Chemical composition

    Nominal composition (range midpoints, orientation only)

    • Ni ≈ 42%
    • Fe ≈ 30%
    • Cr ≈ 21.5%
    • Mo ≈ 3%
    • Cu ≈ 2.25%
    • Other ≈ 1.25%
    Incoloy 825 chemical composition limits
    ElementSymbolMin %Max %
    NickelNi38.046.0
    IronFe22.0—
    ChromiumCr19.523.5
    MolybdenumMo2.53.5
    CopperCu1.53.0
    TitaniumTi0.61.2
    AluminiumAl—0.2
    ManganeseMn—1.0
    SiliconSi—0.5
    CarbonC—0.05
    SulfurS—0.03

    Values per ASTM B425, for orientation. The edition named on your purchase order governs acceptance.

    PURCHASE ORDER / ACCEPTANCE RECORDS

    Standards & documentation

    ASTM B425

    Ni-Fe-Cr-Mo-Cu rod and bar.

    ASME SB-425

    ASME Section II adoption of B425.

    NACE MR0175 / ISO 15156

    Sour-service acceptance is assessed against the actual environment and condition.

    EN 10204 3.1 / 3.2

    Inspection document type, PMI and witness scope stated on the RFQ.

    SPECIALISED INDUSTRIAL PROCUREMENT

    Incoloy 825 fasteners. A complete requirement.

    EMG reviews Incoloy 825 bolts, studs, companion nuts, washers and drawing-controlled components for industrial projects. Specify the exact alloy, condition and assembly requirements. Supply is buy-to-order with quoted lead time, not a stock catalogue or general hardware service.

    MATERIAL / APPLICATION / CONDITION

    825: match the approved material schedule

    Alloy 825 is a nickel-iron-chromium alloy containing molybdenum, copper and titanium. It is considered for selected corrosion-exposed process equipment, subject to the actual medium and design requirements.

    EMG reviews Incoloy 825 requirements through qualified supply partners. Include the drawing revision, quantity, material condition and required site date so sourcing and documentation can be defined before an order is placed.

    Explore the materials reference
    Precision-machined shafts, housings and threaded components illustrating component applications
    EMG component imagery. Photographs illustrate component types; the material certificate verifies the supplied grade.
    PROCUREMENT REFERENCE

    What to specify

    Incoloy 825

    UNS N08825

    Process bolting · acid-service equipment

    RFQ CHECK

    Identify the product-form specification, supplied condition and corrosion acceptance requirements; do not derive bolting strength from a generic producer data sheet.

    Reference designations are not stock, certified equivalence or guaranteed service suitability. Final product requirements govern every quotation.

    WHERE THE SPECIFICATION MATTERS

    Engineered around the application

    Offshore oil and gas platform

    Oil, gas and chemical process equipment

    Project-specified hex bolts, studs and machined parts for approved Alloy 825 material schedules.

    Socket head cap screws illustrating threaded-component applications

    Fastener assemblies

    Studs, hex bolts and companion nuts in Incoloy 825 to the approved drawing. Confirm thread form, length, mating material and any coating requirements.

    Duplex machined valve body illustrating valve-component geometry, not the featured alloy

    Parts to drawing

    Shafts, sleeves, collars and valve parts supplied through qualified manufacturing partners. Fits, surface finish, treatment and usable capacity are confirmed per enquiry.

    ENGINEERING CHECKPOINTS

    Control the details that matter.

    01

    The product specification governs

    Identify the product-form specification, supplied condition and corrosion acceptance requirements; do not derive bolting strength from a generic producer data sheet.

    02

    No automatic substitutions

    825 is not 625: the composition and mechanical requirements differ. Neither alloy name alone certifies NACE MR0175 / ISO 15156 acceptance.

    03

    Verify the finished part

    State the required chemical, mechanical, hardness and dimensional records. Request EN 10204 3.1 / 3.2, PMI or witness inspection where the project requires them; the quotation must identify the agreed scope.

    MATERIAL QUESTIONS

    Ordering Incoloy 825

    What is Incoloy 825?

    Alloy 825 is a nickel-iron-chromium alloy containing molybdenum, copper and titanium. It is considered for selected corrosion-exposed process equipment, subject to the actual medium and design requirements.

    What should a Incoloy 825 RFQ include?

    Identify the product-form specification, supplied condition and corrosion acceptance requirements; do not derive bolting strength from a generic producer data sheet. Include dimensions or drawing revision, quantity, inspection scope and the required site date.

    Can EMG supply Incoloy 825 bolts and machined parts?

    EMG accepts specification-led enquiries for industrial fasteners and components. Product form, sourcing, partner capacity, certification and lead time are confirmed at quotation; this page does not establish stock or guaranteed service suitability.

    Can I substitute a related alloy?

    825 is not 625: the composition and mechanical requirements differ. Neither alloy name alone certifies NACE MR0175 / ISO 15156 acceptance.

    Can Incoloy 825 nuts be quoted from an Inconel 625 specification?

    Not as the same material. Incoloy 825 is UNS N08825; 625 is UNS N06625. Confirm the approved alloy, nut condition, finished geometry and inspection scope before requesting a substitution.

    YOUR SPECIFICATION. OUR SUPPLY NETWORK.

    Send the requirement.
    Get a defined supply route.

    For Incoloy 825 fasteners or machined components, send your drawing, quantity, material condition and required delivery date. EMG confirms sourcing, partner capacity, inspection records and lead time against your RFQ.

    Drawing & dimensions

    Revision, thread form, fits and surface finish.

    Material & condition

    UNS, product standard, heat treatment and service requirements.

    Inspection & records

    Specify EN 10204 3.1 / 3.2, PMI and witness requirements where applicable.

    Managed supply through qualified partners; no claim of EMG-owned machinery or guaranteed stock.

    Quotes typically within 24 hours.

    Connected capabilities

    TECHNICAL REFERENCES

    Incoloy 825 — producer material reference

    Producer references support alloy identification; the approved drawing and governing specification control acceptance. INCONEL and NITRONIC are trademarks of their respective owners. No authorised affiliation is implied.

    GET IN TOUCH

    Ready to Source Your Next Project?

    Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects