Valves & pumps
Valve stems and pump bolting.

17-4 PH stud bolts to ASTM A564 Type 630 for high-strength stainless service, quoted buy-to-order in the heat-treated condition you specify.
17-4 PH is a martensitic precipitation-hardening stainless steel. Its properties depend strongly on the ageing condition, such as H1025, H1100, H1150 or H1150D.
Sour-service projects commonly restrict 17-4 PH to double-aged H1150D with hardness limits. Specify the condition on every RFQ.
View the material referenceReference information only. Your specification and the supplied certificates govern; no stock or equivalence is implied.
Valve stems and pump bolting.
High-strength stainless equipment bolting.
Wear-exposed equipment where stainless strength is required.
Diameter from 1/4" to 6" or M5 to M150, thread form (UNC/8UN or metric), and length measured per ASME B16.5 / B16.47 or your drawing for 17-4 PH.
Specify matched heavy hex nuts, through-hardened washers and any coating, such as Xylan/PTFE, so the kit is quoted as one traceable package.
State EN 10204 3.1 or 3.2, PMI, hardness or impact testing and any project ITP so certificates are confirmed before order.
Send sizes, quantities, nuts, coating, certificates and required date, or attach a line list or drawing. EMG confirms sourcing, records and lead time against your RFQ.
Diameter, thread, length and quantity per line.
ASTM A564 Type 630, ASTM A693 with 17-4 PH or specified heavy hex nuts.
EN 10204 3.1 / 3.2, PMI and testing as specified.
Our technical team is available 24/7 to assist with material selection, specifications, and urgent requirements.
24/7 availability for critical projects