Quotes typically within 24 hours
    Back to Products

    Threaded Rod for Australian Industrial Projects

    Specification-led supply for plant, equipment and project assemblies. Buy-to-order with a quoted lead time.

    EMG / FASTENER DOSSIER

    Threaded Rod: specifications & dimensions

    Threaded rod has continuous external threads and is ordered by diameter, thread series, material grade and length. ASME B18.31.3 covers inch threaded rod geometry; ASME B1.1 governs inch thread form and fit. Rod supplied as material for cutting is not automatically a finished certified flange stud.

    EMG / FORM REFERENCENOT TO SCALE
    THREAD / LENGTH / END FORM
    Form illustration only. The specified standard and approved drawing govern dimensions and tolerances.
    SUPPLY
    Buy-to-order · quoted lead time
    MARKETS
    Australia · Southeast Asia · Asia-Pacific
    ACCEPTANCE
    Specified standard & drawing
    RECORDS
    EN 10204 scope agreed per order
    01 / DIMENSIONAL REFERENCE

    Selected UNC thread sizes

    UNC reference thread counts, not stock lengths. UNF, 8UN and metric series are separate requirements; never substitute based on diameter alone.

    Selected UNC thread sizes. UNC reference thread counts, not stock lengths. UNF, 8UN and metric series are separate requirements; never substitute based on diameter alone.
    Nominal dia. (in)UNC threads per inchFinished length
    1/420Specified per order
    3/816Specified per order
    1/213Specified per order
    02 / SPECIFICATION MAP

    ASME B18.31.3

    Inch threaded rod geometry and dimensional requirements.

    ASME B1.1

    UNC, UNF and constant-pitch UN thread series and fit.

    ISO 261 / ISO 965

    Metric pitch selection and tolerances.

    ASTM A193 / F1554 / F593

    Different material/application requirements only as ordered, not interchangeable grades.

    03 / ENGINEERING NOTES
    01

    Rod versus finished stud

    Cutting, chamfering and any further processing need controlled identification and traceability. Flange stud length must be specified against the joint.

    02

    Coating and fit

    Coating thickness affects thread engagement. Confirm the thread allowance and compatible nuts rather than accepting any rod of the same nominal diameter.

    REFERENCE BASIS

    Selected reference sizes, not a complete tolerance schedule or a stock list. Confirm the current standard edition, material condition and drawing before manufacture or installation.

    Fully threaded stud bolts arranged for visual inspection
    Supplied-parts evidence; certificates and drawings govern each order.
    EN 10204 3.1 Certified
    ISO 9001 Quality
    OVERVIEW

    Overview

    Threaded rod has continuous external threads and is ordered by diameter, thread series, material grade and length. ASME B18.31.3 covers inch threaded rod geometry; ASME B1.1 governs inch thread form and fit. Rod supplied as material for cutting is not automatically a finished certified flange stud. EMG manages supply through qualified manufacturing partners for Australian clients, Southeast Asia and the Asia-Pacific. The specified grade, finish, inspection and certification scope are confirmed with your quotation.

    Threaded rod has continuous external threads and is ordered by diameter, thread series, material grade and length. ASME B18.31.3 covers inch threaded rod geometry; ASME B1.1 governs inch thread form and fit. Rod supplied as material for cutting is not automatically a finished certified flange stud.

    WHERE THEY ARE SPECIFIED

    Typical Applications

    01Industrial support assemblies
    02Drawing-controlled tie rods
    03Project cut-length bolting
    SUPPLY SCOPE

    Fastener Types We Supply

    Continuous-thread rod
    Cut-length threaded rod
    Special thread series to specification
    MATERIAL RANGE

    Common Materials & Grades

    Alloy steel to the specified product standard304 / 316 stainless steelDuplex 2205Super Duplex 2507Inconel 625 / 718Monel K-500Hastelloy C-276
    VERIFICATION

    Standards & Documentation

    Manufactured under ISO 9001 quality systems
    EN 10204 3.1 / 3.2 documentation as specified
    Dimensional and thread inspection against the order
    Material traceability and specified inspection records

    NEED MACHINED COMPONENTS TOO?

    Spacers, blinds, special nuts, shafts and bushes — supplied to your drawing with the same traceability as your bolting. Precision Machined Components →

    FREQUENTLY ASKED QUESTIONS

    Technical FAQs

    Which dimensions govern threaded rod?

    +
    Threaded rod has continuous external threads and is ordered by diameter, thread series, material grade and length. ASME B18.31.3 covers inch threaded rod geometry; ASME B1.1 governs inch thread form and fit. Rod supplied as material for cutting is not automatically a finished certified flange stud.

    Can EMG supply threaded rod for Australian industrial projects?

    +
    Yes. EMG quotes specification-led industrial requirements across Australia, Southeast Asia and the Asia-Pacific. Grade, dimensions, finish, inspection and certification are confirmed per order. Supply is buy-to-order with a quoted lead time.
    GET IN TOUCH

    Need a Quote for Threaded Rod?

    Send us the size, grade and quantity — or your drawings and bill of materials — and we'll return a technical quote for threaded rod with lead times and certification included.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects