Quotes typically within 24 hours
    Back to Products

    U-Bolts for Australian Industrial Projects

    Specification-led supply for plant, equipment and project assemblies. Buy-to-order with a quoted lead time.

    EMG / FASTENER DOSSIER

    U-Bolts: specifications & dimensions

    U-bolts are formed fasteners with two threaded legs. Nominal pipe size does not define rod diameter, leg length or finished clearance. A drawing must distinguish inside width, leg-centre distance, bend radius and the length measurement convention; load and material selection remain engineering decisions.

    EMG / FORM REFERENCENOT TO SCALE
    LEG CENTRES / BEND GEOMETRY
    Form illustration only. The specified standard and approved drawing govern dimensions and tolerances.
    SUPPLY
    Buy-to-order · quoted lead time
    MARKETS
    Australia · Southeast Asia · Asia-Pacific
    ACCEPTANCE
    Specified standard & drawing
    RECORDS
    EN 10204 scope agreed per order
    01 / DIMENSIONAL REFERENCE

    Pipe outside diameter reference · not U-bolt sizing

    Nominal pipe size is not actual outside diameter. These pipe dimensions do not establish load capacity, clearance, bend radius or a standard U-bolt rod size.

    Pipe outside diameter reference · not U-bolt sizing. Nominal pipe size is not actual outside diameter. These pipe dimensions do not establish load capacity, clearance, bend radius or a standard U-bolt rod size.
    Nominal pipe sizePipe outside dia. (in)U-bolt rod / bend / length
    11.315Drawing-controlled
    22.375Drawing-controlled
    44.500Drawing-controlled

    Drawing-controlled U-bolt dimensions

    No universal dimensional table is inferred. Round, square and special bends must follow the approved drawing.

    Drawing-controlled U-bolt dimensions. No universal dimensional table is inferred. Round, square and special bends must follow the approved drawing.
    FeatureRequired definition
    Rod diameterNominal diameter and material condition
    WidthInside, outside or leg-centre dimension
    Leg lengthOverall or tangent-based convention
    Thread lengthUsable thread on each leg and runout
    BendInside radius and forming requirements
    02 / SPECIFICATION MAP

    ASME B1.1 / ISO 965

    Thread geometry and fit for each leg.

    ASTM A193 / F593 or specified alloy standard

    Material requirements only where appropriate to the order; no blanket grade claim.

    Approved fabrication drawing

    Bend geometry, leg dimensions, forming and inspection requirements.

    EN 10204

    Material records and traceability agreed with the project.

    03 / ENGINEERING NOTES
    01

    Pipe clearance is not pipe OD

    Allowances for liners, coatings and insulation change the finished inside width. Pipe OD alone cannot specify the U-bolt.

    02

    Forming and inspection

    Bending affects material condition. The specified forming process, condition and inspection scope must be confirmed before supply.

    REFERENCE BASIS

    Selected reference sizes, not a complete tolerance schedule or a stock list. Confirm the current standard edition, material condition and drawing before manufacture or installation.

    Supplied super duplex U-bolts with threaded legs
    Supplied-parts evidence; certificates and drawings govern each order.
    EN 10204 3.1 Certified
    ISO 9001 Quality
    OVERVIEW

    Overview

    U-bolts are formed fasteners with two threaded legs. Nominal pipe size does not define rod diameter, leg length or finished clearance. A drawing must distinguish inside width, leg-centre distance, bend radius and the length measurement convention; load and material selection remain engineering decisions. EMG manages supply through qualified manufacturing partners for Australian clients, Southeast Asia and the Asia-Pacific. The specified grade, finish, inspection and certification scope are confirmed with your quotation.

    U-bolts are formed fasteners with two threaded legs. Nominal pipe size does not define rod diameter, leg length or finished clearance. A drawing must distinguish inside width, leg-centre distance, bend radius and the length measurement convention; load and material selection remain engineering decisions.

    WHERE THEY ARE SPECIFIED

    Typical Applications

    01Industrial pipe supports
    02Plant support assemblies
    03Drawing-controlled offshore assemblies
    SUPPLY SCOPE

    Fastener Types We Supply

    Round bend U-bolts
    Square bend U-bolts
    Special bends to drawing
    MATERIAL RANGE

    Common Materials & Grades

    Alloy steel to the specified product standard304 / 316 stainless steelDuplex 2205Super Duplex 2507Inconel 625 / 718Monel K-500Hastelloy C-276
    VERIFICATION

    Standards & Documentation

    Manufactured under ISO 9001 quality systems
    EN 10204 3.1 / 3.2 documentation as specified
    Dimensional and thread inspection against the order
    Material traceability and specified inspection records

    NEED MACHINED COMPONENTS TOO?

    Spacers, blinds, special nuts, shafts and bushes — supplied to your drawing with the same traceability as your bolting. Precision Machined Components →

    FREQUENTLY ASKED QUESTIONS

    Technical FAQs

    Which dimensions govern u-bolts?

    +
    U-bolts are formed fasteners with two threaded legs. Nominal pipe size does not define rod diameter, leg length or finished clearance. A drawing must distinguish inside width, leg-centre distance, bend radius and the length measurement convention; load and material selection remain engineering decisions.

    Can EMG supply u-bolts for Australian industrial projects?

    +
    Yes. EMG quotes specification-led industrial requirements across Australia, Southeast Asia and the Asia-Pacific. Grade, dimensions, finish, inspection and certification are confirmed per order. Supply is buy-to-order with a quoted lead time.
    GET IN TOUCH

    Need a Quote for U-Bolts?

    Send us the size, grade and quantity — or your drawings and bill of materials — and we'll return a technical quote for u-bolts with lead times and certification included.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects