Double-End Studs for Australian Industrial Projects
Engineered supply, not off-the-shelf. Drawing-defined geometry, material traceability and a quoted lead time.
Double-End Studs: specifications & dimensions
A double-end stud has threaded sections at both ends separated by an unthreaded body. The ASME clamping type has threads of the same length and configuration at each end for assembly with two nuts. The broader double-end family also includes tap-end studs; identify the form, body diameter and thread fit in the order.
- SUPPLY
- Buy-to-order · quoted lead time
- DIAMETER ENQUIRIES
- 1/4″–6″ · M5–M150; feasibility confirmed per grade
- GEOMETRY
- Order standard & approved drawing
- PRIMARY MARKETS
- Australia · Southeast Asia · Asia-Pacific
Double-end stud geometry schedule
Illustration shows an equal-end configuration only. No universal end-length ratio or body tolerance is implied; the selected form and drawing govern.
| Feature | Reference | Engineering definition |
|---|---|---|
| Threaded ends | L1 / L2 | Define both effective threaded lengths, even where equal |
| Plain body | LB | Unthreaded grip section including specified transitions |
| Body diameter | DB | Full-size or reduced body as explicitly specified |
| Overall length | OAL | End-to-end measurement with end preparation defined |
| Thread fits | End 1 / End 2 | Pitch, series and tolerance class for each mating component |
ASME B18.31.2
Inch stud dimensional reference. Specify the applicable stud form, edition, end geometry and length convention; a material grade alone does not define these.
ASME B18.31.1M
Metric continuous-thread and double-end stud dimensional reference where specified. Do not convert inch dimensions into a metric tolerance schedule.
ASME B1.1 / ISO 261 & ISO 965
Inch or metric thread system, pitch and tolerance requirements as applicable. Define each end separately where fits differ and account for the specified coating.
ASTM A193 / A320 / A453 or alloy-specific standard
Material, heat-treatment and testing requirements selected for the service and product form. These are not substitutes for a dimensional drawing or an engineering suitability assessment.
The plain body defines the grip arrangement
The unthreaded section must suit the joint stack and clearance holes. Specify thread runout and the location of engaged threads rather than treating the entire nominal end length as effective engagement.
Full-size and reduced bodies are not automatic substitutes
A reduced body changes stiffness and stress distribution. Replacement geometry requires engineering approval; matching nominal thread diameter alone is insufficient.
Material and geometry are separate decisions
B7, B7M, L7, B16, stainless, duplex and nickel alloy requirements must include the applicable product standard and condition. Matching nuts, coating, heat traceability and EN 10204 3.1 or 3.2 documentation are agreed for the order; no grade or geometry is automatically interchangeable.
REFERENCE BASIS
Selected reference sizes, not a complete tolerance schedule or a stock list. Confirm the current standard edition, material condition and drawing before manufacture or installation.

Overview
A double-end stud has threaded sections at both ends separated by an unthreaded body. The ASME clamping type has threads of the same length and configuration at each end for assembly with two nuts. The broader double-end family also includes tap-end studs; identify the form, body diameter and thread fit in the order. EMG manages supply through qualified manufacturing partners for Australian oil and gas, mining, power and industrial equipment projects, with Southeast Asia and Asia-Pacific support. Manufacturing operates under ISO 9001 quality systems; the drawing, material condition, inspection scope and documentation are agreed per order.
A double-end stud has threaded sections at both ends separated by an unthreaded body. The ASME clamping type has threads of the same length and configuration at each end for assembly with two nuts. The broader double-end family also includes tap-end studs; identify the form, body diameter and thread fit in the order.
Typical Applications
Fastener Types We Supply
Common Materials & Grades
Standards & Documentation
NEED MACHINED COMPONENTS TOO?
Spacers, blinds, special nuts, shafts and bushes — supplied to your drawing with the same traceability as your bolting. Precision Machined Components →
Technical FAQs
Do double-end studs always have equal threaded lengths?
+
Can a full-threaded stud replace a double-end stud?
+
What documentation can be specified for double-end studs?
+
Need a Quote for Double-End Studs?
Send us the size, grade and quantity — or your drawings and bill of materials — and we'll return a technical quote for double-end studs with lead times and certification included.
Phone
+61 (0)7 4055 6928Emergency Support
24/7 availability for critical projects