Quotes typically within 24 hours
    Back to Products

    Full-Threaded Studs for Australian Industrial Projects

    Engineered supply, not off-the-shelf. Drawing-defined geometry, material traceability and a quoted lead time.

    EMG / FASTENER DOSSIER

    Full-Threaded Studs: specifications & dimensions

    A full-threaded stud is a headless fastener threaded along its working length, apart from specified end chamfers or points. Also called a continuous-thread or all-thread stud, it allows nuts to engage at either end without a defined plain-body grip section. Flange-bolting studs still require their own length and end conventions.

    EMG / FORM REFERENCENOT TO SCALE
    THREAD / LENGTH / END FORM
    Form illustration only. The specified standard and approved drawing govern dimensions and tolerances.
    SUPPLY
    Buy-to-order · quoted lead time
    DIAMETER ENQUIRIES
    1/4″–6″ · M5–M150; feasibility confirmed per grade
    GEOMETRY
    Order standard & approved drawing
    PRIMARY MARKETS
    Australia · Southeast Asia · Asia-Pacific
    01 / DIMENSIONAL REFERENCE

    Continuous-thread geometry and length definitions

    Symbols are specification references, not numerical standard limits. Dimensions, tolerances and end form follow the selected standard and approved order drawing.

    Continuous-thread geometry and length definitions. Symbols are specification references, not numerical standard limits. Dimensions, tolerances and end form follow the selected standard and approved order drawing.
    FeatureReferenceEngineering definition
    DiameterDNominal thread diameter; confirm inch or metric series
    PitchP / TPIMetric pitch or inch threads per inch, with external thread class
    Overall lengthOALEnd-to-end length; explicitly state whether points are included
    Usable threadLTEffective thread available for engagement, excluding non-effective end features
    EndsDrawingChamfer, point or other specified end preparation
    02 / SPECIFICATION MAP

    ASME B18.31.2

    Inch stud dimensional reference. Specify the applicable stud form, edition, end geometry and length convention; a material grade alone does not define these.

    ASME B18.31.1M

    Metric continuous-thread and double-end stud dimensional reference where specified. Do not convert inch dimensions into a metric tolerance schedule.

    ASME B1.1 / ISO 261 & ISO 965

    Inch or metric thread system, pitch and tolerance requirements as applicable. Define each end separately where fits differ and account for the specified coating.

    ASTM A193 / A320 / A453 or alloy-specific standard

    Material, heat-treatment and testing requirements selected for the service and product form. These are not substitutes for a dimensional drawing or an engineering suitability assessment.

    03 / ENGINEERING NOTES
    01

    Continuous thread is not a flange-length convention

    ASME B18.31.2 covers continuous-thread studs and flange-bolting studs as distinct forms. A point-to-point overall length must not be assumed to equal a flange stud length measured under another convention. Confirm the measurement basis before replacing an existing stud.

    02

    Studs versus threaded rod

    Threaded rod is a product-length requirement; a finished stud is defined for an assembly. Cutting rod to length does not by itself establish the required end finish, marking, inspection or material certification for the finished stud.

    03

    Material and geometry are separate decisions

    B7, B7M, L7, B16, stainless, duplex and nickel alloy requirements must include the applicable product standard and condition. Matching nuts, coating, heat traceability and EN 10204 3.1 or 3.2 documentation are agreed for the order; no grade or geometry is automatically interchangeable.

    REFERENCE BASIS

    Selected reference sizes, not a complete tolerance schedule or a stock list. Confirm the current standard edition, material condition and drawing before manufacture or installation.

    Fully threaded stud bolts arranged for visual inspection
    EMG supplied continuous-thread studs. Grade and certification follow the individual order.
    EN 10204 3.1 Certified
    ISO 9001 Quality
    OVERVIEW

    Overview

    A full-threaded stud is a headless fastener threaded along its working length, apart from specified end chamfers or points. Also called a continuous-thread or all-thread stud, it allows nuts to engage at either end without a defined plain-body grip section. Flange-bolting studs still require their own length and end conventions. EMG manages supply through qualified manufacturing partners for Australian oil and gas, mining, power and industrial equipment projects, with Southeast Asia and Asia-Pacific support. Manufacturing operates under ISO 9001 quality systems; the drawing, material condition, inspection scope and documentation are agreed per order.

    A full-threaded stud is a headless fastener threaded along its working length, apart from specified end chamfers or points. Also called a continuous-thread or all-thread stud, it allows nuts to engage at either end without a defined plain-body grip section. Flange-bolting studs still require their own length and end conventions.

    WHERE THEY ARE SPECIFIED

    Typical Applications

    01Drawing-specified pressure-equipment closures
    02Flange assemblies with defined stud length conventions
    03Industrial plant maintenance and shutdown replacement
    04OEM assemblies requiring continuous nut engagement
    SUPPLY SCOPE

    Fastener Types We Supply

    Continuous-thread inch studs
    Metric all-thread studs
    Flange-bolting studs to the specified length convention
    Custom-length, coated or alloy studs to order
    MATERIAL RANGE

    Common Materials & Grades

    VERIFICATION

    Standards & Documentation

    Manufactured under ISO 9001 quality systems
    EN 10204 3.1 / 3.2 documentation as specified
    Thread gauging and dimensional inspection against the approved order
    Heat traceability, coating and additional testing scope agreed per quotation

    NEED MACHINED COMPONENTS TOO?

    Spacers, blinds, special nuts, shafts and bushes — supplied to your drawing with the same traceability as your bolting. Precision Machined Components →

    FREQUENTLY ASKED QUESTIONS

    Technical FAQs

    Are full-threaded, all-thread and continuous-thread studs the same?

    +
    These names commonly describe a headless stud threaded along its working length. The order must still define end preparation, usable thread, length convention and dimensional standard, particularly for flange bolting.

    Is stud length measured including the points?

    +
    It depends on the specified stud form and standard. State the measurement basis on the drawing; do not assume point-to-point overall length and flange-bolting length are identical.

    Can EMG supply full-threaded studs across Australia?

    +
    EMG reviews full-threaded stud requirements for Australian industrial projects, Southeast Asia and Asia-Pacific. Send the drawing or standard, diameter, pitch, length, grade, quantity and records required. Supply is buy-to-order with quoted lead time.
    GET IN TOUCH

    Need a Quote for Full-Threaded Studs?

    Send us the size, grade and quantity — or your drawings and bill of materials — and we'll return a technical quote for full-threaded studs with lead times and certification included.

    INDUSTRIAL PROJECT ENQUIRY

    Request a Quote

    PDF, XLSX, CSV, CAD or images · up to 10 files, 25 MB each

    Quotes typically within 24 hours. Specialised industrial supply, buy-to-order with quoted lead time.

    Emergency Support

    24/7 availability for critical projects